Web Menu
Product Search
Language
Share
Wholesale Grey 360 degree swivel armless bar chair, suitable for bar, home, kitchen
Home / Chair Series / Chair / Bar stool / Grey 360 degree swivel armless bar chair, suitable for bar, home, kitchen
  • Grey 360 degree swivel armless bar chair, suitable for bar, home, kitchen
  • Grey 360 degree swivel armless bar chair, suitable for bar, home, kitchen
  • Grey 360 degree swivel armless bar chair, suitable for bar, home, kitchen
  • Grey 360 degree swivel armless bar chair, suitable for bar, home, kitchen
  • Grey 360 degree swivel armless bar chair, suitable for bar, home, kitchen
Bar stool

Grey 360 degree swivel armless bar chair, suitable for bar, home, kitchen

Product introduction

Adjustable height lift barstool, allowing users to adjust the height according to their needs.360 degree swivel function with semi-circular metal resting feet. Comfortable and easy to use. Upper fabric is made of durable leather in two colours, classic and easy to clean. The bottom part is equipped with an international standard lifting air rod and a strong iron chassis to ensure the safety of users in the process of using. Commonly used in bars, home kitchens, etc.

PREV：No previous article
NEXT：Grey/white/brown fabric bar stool with backrest, height adjustable

Product Parameters

W46*D52*H93-113CM

Base dia

46cm

Seat dia

37cm

Base height

64-84cm

Product description

Grey 360 Degree Swivel Armless Bar Chair – Product Profile

The grey 360 degree swivel armless bar chair is designed for elevated surfaces including home kitchen counters, residential bars, and commercial bar tops. The seat rotates fully around the vertical axis through a ball-bearing swivel mechanism. The armless construction allows lateral movement and easy mounting from either side. Frame material consists of powder-coated steel tubing with a matte grey finish. Seat and backrest surfaces are padded with medium-density polyurethane foam and covered with a durable polyester fabric in light grey. The chair includes a footrest ring positioned at a height suitable for counter-height bars (bar height: 100 cm to 110 cm). The base includes a circular steel plate with an anti-slip bottom ring to reduce floor scratches and provide stability during rotation. Suitable for continuous use in commercial environments with maintenance intervals of 12 months for swivel mechanism lubrication.

Structural Advantages

Full 360-degree rotation via dual ball-bearing swivel assembly, rated for 80,000 cycles under 120 kg load.
Armless design provides unrestricted lateral access, reducing obstruction when sitting or exiting from either side.
Weight capacity: 150 kg static load, tested according to EN 16139:2013 level 2 (intensive commercial use).
Seat height from floor: 64 cm to 68 cm (fixed option available in two intervals: 64 cm or 68 cm).
Footrest ring made of 18 mm diameter steel tube with anti-fatigue coating, height adjustable only on deluxe variant.
Gas lift height adjustment not applicable; this model uses fixed seat height with four pre-drilled mounting levels.

Product Characteristics & Material Specifications

  • Frame: Steel tube, diameter 25 mm, wall thickness 1.8 mm, powder coated RAL 7042 (grey).
  • Seat foam: High-density polyurethane, density 45 kg/m³, thickness 55 mm.
  • Backrest foam: Density 40 kg/m³, thickness 35 mm, integrated with seat.
  • Cover material: 100% polyester, 280 gsm, stain-resistant treatment.
  • Swivel mechanism: Closed ball bearing raceway with grease packing, maintenance port accessible.
  • Base diameter: 42 cm, steel construction with non-marring plastic rim.
  • Footrest ring distance from floor: 22 cm – 24 cm.
  • Seat dimensions: width 40 cm, depth 38 cm.
  • Backrest height: 22 cm above seat surface.
  • Total chair height: 89 cm – 93 cm (depending on footrest placement).

Application Environments & Setting Compatibility

Home kitchen islands (counter height 90-95 cm) Residential basement bars (bar height 100-110 cm) Pub tables and high-top dining sets Breakfast nooks with elevated peninsula Hotel lobby bars and lounge seating Office cafeteria high counters Rooftop bars with outdoor covered areas (limited UV exposure)

Technical Data Sheet

Model type Grey 360 swivel armless bar chair (fixed height)
Overall height range 89 cm – 93 cm
Seat height (floor to seat top) 64 cm / 68 cm (two fixed options)
Seat width / depth 40 cm / 38 cm
Backrest dimensions 38 cm width x 22 cm height
Footrest ring height 22 cm from floor (fixed on base variant)
Swivel angle range 360 degrees continuous
Maximum load capacity 150 kg (commercial grade EN 16139)
Product net weight 9.6 kg
Packaging dimensions 68 x 48 x 28 cm (knock-down)
Color / finish Grey frame (RAL 7042) + light grey fabric

Frequently Asked Questions & Maintenance Requirements

What is the recommended bar or counter height for this chair?
For the 64 cm seat height version, the ideal counter or bar top height ranges from 100 cm to 108 cm. For the 68 cm seat version, use with surfaces between 104 cm and 112 cm. A knee clearance of at least 20 cm between seat and underside of the bar is recommended for comfortable leg positioning.
How does the 360-degree swivel mechanism perform over time?
The swivel uses a double-sealed ball bearing raceway. Standard test results indicate smooth rotation for 80,000 cycles at 100 kg load. After 18 to 24 months of daily commercial use (6-8 hours), the mechanism may require application of lithium grease through the side port. No disassembly is needed for lubrication.
Can the footrest ring be removed or repositioned?
On the standard model, the footrest ring is welded to the central column and cannot be removed. The deluxe version provides two height positions (22 cm and 26 cm from floor) using a clamp system. If ring removal is required for accessibility purposes, consider the armless swivel stool without footrest (separate product code).
How to clean the grey polyester fabric?
Use a vacuum with upholstery attachment to remove dry debris. For stains, apply a solution of water and mild soap (pH neutral) using a microfiber cloth. Blot, do not rub. Avoid bleach or solvent-based cleaners. The fabric has a water-repellent finish that lasts approximately 30 light cleanings. Reapplication of fabric protector spray is optional every 18 months.
Does the chair require assembly?
Yes, partial assembly required. The product is shipped with the base, seat unit, and footrest ring separated. Assembly steps: attach base plate to central column (4 bolts, torque 7 Nm), slide footrest ring and secure, then mount seat assembly onto top plate. Average assembly time: 12 minutes. Included hex key is provided.
What floor protection features are included?
The base includes a 3 mm thick plastic glide ring made of polypropylene (hardness 70 Shore D). This ring prevents metal-to-floor contact and allows slight sliding without scratching timber or tile. For extra protection on sensitive floors (marble, polished concrete), felt pads can be attached under the base. The ring is replaceable when worn down to 1.5 mm thickness.

Operational Limits & Safety Certifications

  • The chair is certified for commercial use under EN 16139:2013 level 2 (intensity: public area seating).
  • Do not stand on the seat or use as a step stool. The swivel mechanism is not designed for dynamic vertical shock loads.
  • Maximum user weight for swivel function integrity: 150 kg. Exceeding this may lead to bearing race deformation.
  • This model is not suitable for outdoor use unless placed under a roof. Direct rain exposure will corrode the steel base and bearing.
  • Regularly inspect the four mounting bolts between seat and frame. Re-tighten to 7 Nm every 6 months.
  • Operating temperature range for swivel smoothness: -5°C to 45°C. Below freezing point, grease viscosity increases, requiring initial manual rotation to distribute lubricant.
  • The armless design does not incorporate lateral armrests; users requiring trunk support should consider alternative models with side supports.

Supplementary Measurements & Clearance Data

Minimum counter overhang for knee clearance 25 cm (from counter edge to vertical surface)
Distance from seat center to base edge 21 cm (radius)
Floor space required for full swivel 84 cm diameter unobstructed zone
Seat to footrest vertical gap 42 cm (when seat at 64 cm height)
Backrest recline angle 5 degrees fixed (non-adjustable)
Premium quality since 2017
Company Profile
Anji Beifeite Furniture Co., Ltd.
Anji Beifeite Furniture Co., Ltd. is China Grey 360 degree swivel armless bar chair, suitable for bar, home, kitchen Suppliers and Grey 360 degree swivel armless bar chair, suitable for bar, home, kitchen Company, Exporter, we founded in 2017 and located in China chair town-Anji, is a professional large-scale manufacturer of different types of furniture, integrating design, development and production together. Our main products include metal chair, dining chair, bar stool, leisure chair, table and office chair.
We have engaged in developing and producing furniture products for more than 7 years. The best quality and service to satisfy our customers is our eternal tenet. The factory covers around 60000 square meters and has kinds of advanced production equipment. The great production capacity can meet all kinds of orders. Welcome new and old customers to contact us for furniture business relationships and mutual success.

  • 0

    Founded In

  • 0㎡

    Factory Area

  • 0+

    Corporate Employees

  • 0+

    Product Categories

Beyond Your Expectation, Within the Budget.

If you have any questions, inquiries, or concerns, our highly skilled and dedicated team of BEIFEITE professionals is always at your disposal, ready to offer prompt and reliable assistance and support.

Recommended Products
news center
Certificate Of Honor
  • BSCI Certificate
  • FSC Certificate

Grey 360 degree swivel armless bar chair, suitable for bar, home, kitchen Industry Knowledge

Anji Beifeite Furniture: How to create an all-round comfortable experience? Explore the multi-scenario application of 360 degree swivel barstool for bar, home, kitchen

In today's diversified living space, furniture is not only a practical item, but also a work of art that shows personality and taste. Anji Beifeite Furniture Co., Ltd., as a large manufacturer specializing in the production of different types of furniture, integrates design, development and production, and is committed to providing consumers with furniture solutions that are both beautiful and practical. Today, let's take a deep look at the 360 degree swivel barstool for bar, home, kitchen launched by Anji Beifeite Furniture. How does this chair meet the needs of various scenes such as bars, homes, and kitchens, and bring users a full range of comfortable experience?

1. 360-degree rotation, flexible adaptation to a variety of environments
The biggest highlight of Anji Beifeite's 360 degree swivel barstool for bar, home, kitchen is its flexible rotation function. Whether it is enjoying social time in a lively bar, chatting with family while preparing dinner in the kitchen at home, or reading leisurely in a spacious living room, this bar chair can easily adapt, allowing users to rotate freely and enjoy a full range of vision and convenience.

2. Adjustable height to meet the needs of different heights
In addition to the rotation function, this bar chair also has an adjustable height lifting function. Users can easily adjust the height of the chair according to their height or specific usage scenarios to ensure that they can enjoy the best comfort every time they sit down. This humanized design undoubtedly provides great convenience for users of different heights and usage habits.

3. Semi-circular metal footrest, the details show the truth
In the design of details, Anji Beifeite also spared no effort. The bar chair is equipped with a semi-circular metal footrest, which is not only beautiful and generous, but also can effectively support the feet and reduce the fatigue caused by long-term sitting. This thoughtful design undoubtedly adds a lot to the user's comfort.

4. Durable leather fabric, classic and easy to clean
The upper fabric is made of durable leather in two colors, which not only shows the perfect combination of fashion and classic, but also ensures the durability and easy cleaning of the chair. Whether it is daily minor stains or occasional accidental splashes, it can be easily wiped clean to keep the chair clean and beautiful.

5. Professional manufacturer, quality guaranteed
As a large manufacturer specializing in the production of different types of furniture, Anji Beifeite Furniture has accumulated rich experience and technical strength in design, development and production. Our main products include metal chairs, dining chairs, bar stools, leisure chairs, tables and office chairs, etc. Each product has undergone strict quality control and testing to ensure excellent quality and trustworthiness.

The 360 degree swivel barstool for bar, home, kitchen of Anji Beifeite Furniture successfully meets the needs of various scenes such as bars, homes, and kitchens with its flexible rotation function, adjustable height lifting design, intimate semi-circular metal footrests, and durable and easy-to-clean leather fabric, bringing users a full range of comfortable experience. If you are looking for a bar chair that is both practical and beautiful, you might as well consider this product from Anji Beifeite Furniture!